Changing Your Camino Knob 29 Sep 2020, 3:14 pm

The Importance Of Cleaning Your Grease Filters 28 Aug 2020, 6:00 pm

Ventilation maintenance is required in order to keep your range hood running properly and efficiently. One important cleaning tip is to make sure that your grease filters are cleaned frequently, especially if your range hood is used often. Over time grease and other impurities tend to stick to the bottom of your filters. If you do not clean these filters, especially after heavy use, your filters will not be as effective. Below are some tips on how to keep your home safe and your filters cleaned correctly.

Removing Your Filter

Faber has a variety of wonderful styles to choose from and most of these models have grease filters conveniently located on the underside of the hood. Twelve of our models are designed with a front panel for our perimeter aspiration feature. If you have one of these models simply pull down the perimeter aspiration panel in order to access the grease filters. Once you have accessed the filters, grab a hold of the pull tab and the filters should slide right out.

How Often Should You Clean Your Grease Filters? 

Your grease filters must be cleaned every 2 months of operation or more frequently for particular heavy usage. Your filters can be washed by soaking in warm water and dish detergent or simply by placing them in the dishwasher. When working with your filters please make sure not to bend or fold as this could cause damage. After cleaning, please make sure filters are completely dry and all water and/or liquids are completely gone before re-installing.

If you are planning on cleaning the outside of your range hood at the same time as your filters, please remember that only stainless steel cleaner should be used on stainless steel range hoods. Abrasives and scouring agents can scratch stainless steel finishes and should not be used to clean a finished surface.

We hope these tips will help with the efficiency and longevity of your hood.

Faber’s Filter Technology 13 Apr 2020, 4:27 pm

Now more than ever homeowners are striving to keep their homes clean of any unwanted impurities such as bacteria, smoke, grease, heat and steam. A great way to help to remove any of these unwanted chemicals and moisture is to purchase a range hood. Faber hoods of all sizes and styles are designed to filter air up through a fan that is recirculated or carried outside. If your home does not have proper air flow you could be exposed to hazardous gas fumes such as carbon monoxide. All Faber products are designed with exterior filters and charcoal filters if you are planning on recirculating in your kitchen. Below is a list of Faber filters that help to clean impurities out of the home.

Recirculation (Listed are our newer options)

FILTER1- Charcoal Filter Kit- A high quality charcoal filter kit for use when recirculating the air back into the kitchen. Filters out odor and should be replaced every 6 months.

FILTER1LL– Long Lasting Charcoal Filter Kit- New washable charcoal filter that can be recharged and washed up to 8 times. For use when recirculating the air back into the kitchen. Filters out odor and can last up to 4 years.

FILTER5– An activated charcoal filter that is not washable and cannot be regenerated. This filter must be replaced every 4 months of operation, or more frequently with heavy use.

Grease Filter Options (Listed are our newer options)

Baffle Grease Filters- Strong resistant metal filters that stand up to tough impurities and grease. These dishwasher safe stainless steel metal filters capture grease and allow for easy clean up in the dishwasher.

Mesh Grease Filters- Durable and strong mesh filters that are dishwasher safe. These filters capture grease and allow for easy clean up in the dishwasher.

The customer may be able to replace the mesh filters with metal grease filters and vice versa. Call our headquarters today to find out more information. These kits would include:

Baffle 2/Baffle 3

Mesh 2/Mesh 3

Grease Filter Care

Grease filters can be cleaned in hot detergent solution or washed in the dishwasher. These should be cleaned every 2 months, or more frequently if use is particularly heavy.  Please make sure that your filter is completely dry before installing back into your hood.

A kitchen remodel is an expensive investment so it is important to protect the investment with proper ventilation as well as filtration. For more information contact Faber directly or visit our website at www.faberonline.com.

Under-Cabinet Hoods By Faber 16 Mar 2020, 8:14 pm

Faber has a number of hoods to suit each customer’s needs but one style we would like to point out is the under-cabinet hood. The under-cabinet hood offers superior performance with a stylish feel but does not exceed your budget. Below is a complete list of this particular model.

Levante 1 – A updated and traditional 300 CFM under cabinet range hood. The Levante 1 has LED lighting, welded construction, new updated controls and dishwasher safe mesh filters.

Levante 2 – A new traditional under cabinet range hood with the ability to duct outside or recirculate through grids located on top of the hood. The Levante 2 is 400 CFM with 4 speed electronic control. Other features include two level halogen lighting, top or direct rear venting and ductless out front vents. This product is also ADA compliant with optional wireless remote control.

Levante 2 Plus – A traditional under cabinet range hood with 400 CFM.  The Levante 2 Plus features include LED lighting, 4 speed electronic control, vari-duct top or direct rear venting, ducted only and no conversion to recirculating.

Maestrale 10 – A 600 CFM professional 10″ hood with a sense of style. The Maestrale 10 has seamless edges, LED lamps, top or rear venting and multiple chimney options. This particular model is the most versatile and easy to install PRO hood available.  Other features include 3 speed slide control, 5 watt LED lights, convertible to a ductless and top or direct rear venting.

Maestrale 18 – A 600 CFM 18″ professional hood with a sense of style. The Maestrale 18 has seamless edges, LED lamps, top or rear venting and multiple chimney options. This model is the most versatile and easy to install PRO hood available. Other features include 3 speed slide control, 5 watt LED lights, convertible to ductless and top or direct rear venting.

Ostro – A 400 CFM 10″ affordable professional hood with a sense of style. The Ostro has baffle filters, halogen lights, top or rear venting and multiple chimney options. This model is versatile and easy to install. Other features include 4 speed electronic control, halogen lights, convertible to a ductless, vari-duct top or direct rear venting.

To learn more about these models and the rest of our product line visit our website at www.faberonline.com or contact our Faber USA & Canada headquarters today!

Humidity & Moisture In The Home 27 Feb 2020, 8:38 pm

The kitchen is one of the biggest offenders in the home when it comes to collecting excess moisture and steam. Excess humidity can lead to mold, mildew, indoor air pollutants and discomfort in the home. Mold exposure can cause congestion, throat irritation, coughing and other respiratory issues such as asthma and allergies.

One of the best ways to remove unwanted impurities from the kitchen is to purchase a range hood. A range hood is a great way to remove excess steam, heat, carbon monoxide and other pollutants that cooking can release into the air. When using this product it is recommended to turn on 15 minutes before and after cooking. This will help to capture any moisture that may be lingering before and after food preparation.

It is also important to clean your grease and charcoal filters. Metal grease filters should be cleaned every two months or more frequently with heavy use. You should place your filters in a hot detergent solution or wash in the dishwasher. Abrasives and scouring agents can scratch the stainless steel finish and should not be used to clean a finished surface. Please remove all water or any other liquid before re-installing the filters.  Faber also has two different types of charcoal filters that need to be cleaned or maintained if you are recirculating. The first option is the FILTER1. The FILTER1 is non washable option that cannot be regenerated. This filter should be replaced every 4 months or more frequently with heavy use. The second type of charcoal filter is the FILTER1LL. The FILTER1LL is a new model that can be washed up to 8 times and lasts up to 4 years. Please remember to completely dry before placing back up into the hood. These simple tips will help your vent hood’s longevity and capture moisture and steam more effectively.

Please consider Faber when choosing ventilation as we have a variety of styles to choose from and we strive for complete customer satisfaction.

Faber’s New & Improved Levante 6 Feb 2020, 1:49 pm

Faber would like to announce that the Levante 1 now has a new look and feel! The Levante is a 300 CFM traditional under cabinet range hood that offers superior style and performance but will not exceed your budget. This updated model no longer has front venting and is manufactured and engineered with perfectly welded edges giving the product a more streamline look. New back-lit controls with a LED indicator help to confirm which speed you have chosen while also giving the product a more stylish feel. Halogen lighting is located on the underside of the unit warmly lighting your task space. Multi-layered mesh filters help to catch any unwanted grease, steam and smoke that has been produced while cooking. When cleaning is needed, you may simply slide out the grease filters and place in the dishwasher. Ventilation is important and is becoming more popular in homes around the world. Faber believes that the Levante 1 will succeed in today’s market with its new appearance, easy install and affordable price.

The High-Light Ceiling Hood Available In 2020! 7 Jan 2020, 2:33 pm

As the calendar year turns, Faber is excited to reveal new products and accessories that will soon be available to the United States and Canada. The first new product we would like to introduce is the High-Light. The High-Light is a 36” ceiling mounted hood that will be available in stainless steel or a white matte finish. This flush ceiling unit is engineered with a strong and durable metal motor that brings top performance to any kitchen. Perimetric aspiration forces air through narrow slots around the perimeter helping to remove impurities, improve energy efficiency and decrease noise levels. LED lighting successfully illuminates any cooking surface while remaining energy efficient. Other features include 4 speed digital capability, dishwasher safe mesh grease filters and a remote control. We believe the High-Light will thrive in today’s market and we are excited to add an additional ceiling hood to our inventory.

For more information on our company and our full product line please visit our website at www.faberonline.com.

Faber’s Down Draft Models 18 Dec 2019, 4:00 pm

Faber’s range hoods are designed in various shapes, sizes and technologies. Kitchens around the world are designed with these various models based on the customer’s preference or the layout of their home. Many choose to have their hood as the focal point of their kitchen while others prefer to have their hood unseen when not in use.

One style we would like to point out is our integrated down draft models. This particular style is sleek in design and perfect for any island installation. Both models have a reversible motor box that fits behind the range top, cooktop or cooktop/ oven combo. These two models are designed unbranded so they pair well with all other brands.

The Scirocco Lux is a pro motor 15’’ tall rising down draft with a front glass panel that can be purchased in black or light gray. A LED light is located in the front upper portion of the model that illuminates your cooking surface with a dimmer capability. Electronic Controls display your current speed, two level lighting, 24 hour anti- pollution mode and filter wash. With a simple push of a button, the Scirocco slides out of the counter when in use and retracts back down once cooking is complete. Perimetric Aspiration forces air through narrow slots along the perimeter of the hood greatly improving the removal of pollutants. Mesh grease filters are located behind the front magnetic glass panel and can easily be removed and placed in detergent or the dishwasher.

The Scirocco Plus is available in 30’’ or 36’’ and is a 14’’ tall rising down draft hood. This model unlike the Scirocco Lux that is made out of pure stainless steel. With a simple push of its speed dial, the product slides up and down out of your counter top. Mesh grease filters are located behind the front panels which are easily accessible when cleaning is needed. Other features include auto shut off, multiple safety features and a remote control.

To learn more about these models and the rest of our product line visit our website at www.faberonline.com or contact our Faber USA & Canada headquarters today!

Hood Ventilation Tips During The Holidays 25 Nov 2019, 6:08 pm

Thanksgiving is just around the corner which means the smell of turkey and homemade pie will soon be a welcoming aroma in your kitchen. Loved ones and friends will soon gather to give thanks and enjoy a home cooked meal. During this time numerous dishes will be baked or boiled in your kitchen resulting in your stove working overtime.  It is important that the air in your kitchen is clean and proper ventilation is being used. Smoke, grease, heat, steam and odors are byproducts of your cooking every time a meal is prepared. It is essential that your range hood is properly maintained to remove any unwanted impurities out of this space.

Below are some tips on how you can keep your range hood clean and functioning properly:

1. Clean your range hood – Stainless steel cleaner should be used on all stainless range hoods. Abrasives and scouring agents can scratch stainless steel finishes and should not be used to clean finished surfaces.

2. Clean your grease filters – The filters must be cleaned every 2 months of operation, or more frequently for particularly heavy usage. The metal grease filters should be cleaned frequently in hot detergent solution or washed in the dishwasher. Remove all water or any other liquid from washing before re-installing filters.

3. Replace Charcoal Filters – If you have a recirculating hood, keep in mind that the charcoal filters must be replaced every four months of operation or more frequently with heavy use.

We hope these simple tips will make your holiday cooking more enjoyable. Faber USA would like to wish everyone a safe and happy thanksgiving!

Faber’s Inca Pro Plus Is Featured In Boaz Construction Remodel 12 Nov 2019, 6:04 pm

Boaz Construction located in Indianapolis, Indiana is said to be an expert in custom homes, hospitality and the commercial industry. Boaz strives to work with integrity, attention to detail and communication throughout the remodeling process. Their passion is to bring their clients vision to life while ensuring all aspects of the project are executed with precision.

Faber was fortunate enough to be a part of one of Boaz’s remodels titled the Crows Nest Project. This classic remodel incorporated french provincial influence on both the exterior and interior of the home. The home was built in 1950 and the client wanted a complete remodel while also keeping the integrity of the home.

High end finishes including fixtures, tile, flooring and paint was selected throughout the home and installed by their team of professional craftsman. The kitchen is lined with custom fired tile back splash, marble counter tops and oak cabinetry. In front of the custom back splash is Faber’s Inca Pro Plus hood. This robust yet refined model is located in a stainless steel shroud which pairs perfectly with the selected professional range. The models sparkling stainless steel baffle filters line the bottom of the model collecting any impurities around the cooking surface. Currently available in 4 widths and 2 depths, the product is ideal for a variety of kitchen types. The Inca Pro Plus offers power, style and functionality that you need for today’s custom pro applications.

We want to thank Boaz Construction for featuring Faber in this pristine remodel. We hope that you will consider our product in future projects to come. To visit the Crows Nest full remodel page click here.  For more information on the Inca Pro Plus as well as any of our other models visit our website at www.faberonline.com .