pH –  8.6 ± 0.2

Appearance – Opaque White Emulsion

Fragrance – Polymeric

Freezing Point – About 32°F

% Total Solids – 25.4

% Non-Volatile Solids – 19.5 ± 0.5

Boiling Point – 212°F

Solubility in Water – Dispersible

Flash Point – None

Coverage – 1700 – 2000 sq. ft per gallon (may vary due to differences in porosity of the surface.)

Initial Application: 

1. Remove old sealer/finish following label directions using an appropriate Franklin stripper.
2. Apply a thin coat of AccoladeTM using a clean finish mop.
3. Allow 30-60 minutes drying time.
4. Apply 3-4 additional coats. For best results, allow adequate drying time between coats.

Maintenance:

1. Dust mop the floor. Remove gum, labels and other attached soils with a
   long-handled scraper or putty knife.
2. Damp mop or autoscrub using a Franklin cleaner, following the label directions.

Water – 7732-18-5

Styrene acrylic polymer – 25085-34-1

Diethylene glycol monoethyl ether – 111-90-0

Polypropylene emulsion – Mixture

Tri butoxyethyl phosphate – 78-51-3